Coastal Skipper revision module 3 of 17
Anchoring considerations and characteristics of different anchor types.
5 guided lessons · 20 practice questions · 17 flashcards
A self-guided revision companion that explains essential concepts, then helps you practise and test them. It supports—but does not replace—recognised instruction, practical training, assessment or certification. Access is a one-time payment, not a subscription.
Use this module hub to choose the right lesson, then open the dedicated lesson page for the complete explanation, worked examples, FAQs, and practice questions.
A good anchorage offers shelter from the wind and sea, adequate depth (allowing for tidal range), good holding ground (sand or mud), enough room to swing, and a clear approach free from h...
Different anchor designs work better in different seabed types. The CQR (plough) anchor performs well in sand and mud and sets reliably. The Bruce (claw) anchor is good all-round and self...
Approach the chosen spot heading into the wind (or tide, whichever is stronger). Stop the boat and lower the anchor — don't throw it. Pay out the cable (chain or warp) as the boat drifts...
To weigh (recover) the anchor, motor slowly forward while retrieving the cable. This takes the load off the cable and makes retrieval easier. When the cable is vertical (the anchor is dir...
Kedging is the technique of using an anchor to move the boat rather than to hold it in position. A kedge anchor is rowed out in the dinghy (or thrown ahead if close enough) and dropped, t...
Add the complete practice layer
Keep reading the public lesson articles, and add this module's guided flow, quizzes, spaced-repetition flashcards, progress, and mock exams with one payment.